Why AI Misreads The Middle Of Your Best Pages via @sejournal, @DuaneForrester

The middle is where your content dies, and not because your writing suddenly gets bad halfway down the page, and not because your reader gets bored. But because large language models have a repeatable weakness with long contexts, and modern AI systems increasingly squeeze long content before the model even reads it.

That combo creates what I think of as dog-bone thinking. Strong at the beginning, strong at the end, and the middle gets wobbly. The model drifts, loses the thread, or grabs the wrong supporting detail. You can publish a long, well-researched piece and still watch the system lift the intro, lift the conclusion, then hallucinate the connective tissue in between.

This is not theory as it shows up in research, and it also shows up in production systems.

Why The Dog-Bone Happens

There are two stacked failure modes, and they hit the same place.

First, “lost in the middle” is real. Stanford and collaborators measured how language models behave when key information moves around inside long inputs. Performance was often highest when the relevant material was at the beginning or end, and it dropped when the relevant material sat in the middle. That’s the dog-bone pattern, quantified.

Second, long contexts are getting bigger, but systems are also getting more aggressive about compression. Even if a model can take a massive input, the product pipeline frequently prunes, summarizes, or compresses to control cost and keep agent workflows stable. That makes the middle even more fragile, because it is the easiest segment to collapse into mushy summary.

A fresh example: ATACompressor is a 2026 arXiv paper focused on adaptive, task-aware compression for long-context processing. It explicitly frames “lost in the middle” as a problem in long contexts and positions compression as a strategy that must preserve task-relevant content while shrinking everything else.

So you were right if you ever told someone to “shorten the middle.” Now, I’d offer this refinement:

You are not shortening the middle for the LLM so much as engineering the middle to survive both attention bias and compression.

Two Filters, One Danger Zone

Think of your content going through two filters before it becomes an answer.

• Filter 1: Model Attention Behavior: Even if the system passes your text in full, the model’s ability to use it is position-sensitive. Start and end tend to perform better, middle tends to perform worse.
• Filter 2: System-Level Context Management: Before the model sees anything, many systems condense the input. That can be explicit summarization, learned compression, or “context folding” patterns used by agents to keep working memory small. One example in this space is AgentFold, which focuses on proactive context folding for long-horizon web agents.

If you accept those two filters as normal, the middle becomes a double-risk zone. It gets ignored more often, and it gets compressed more often.

That is the balancing logic with the dog-bone idea. A “shorten the middle” approach becomes a direct mitigation for both filters. You are reducing what the system will compress away, and you are making what remains easier for the model to retrieve and use.

What To Do About It Without Turning Your Writing Into A Spec Sheet

This is not a call to kill longform as longform still matters for humans, and for machines that use your content as a knowledge base. The fix is structural, not “write less.”

You want the middle to carry higher information density with clearer anchors.

Here’s the practical guidance, kept tight on purpose.

1. Put “Answer Blocks” In The Middle, Not Connective Prose

Most long articles have a soft, wandering middle where the author builds nuance, adds color, and tries to be thorough. Humans can follow that. Models are more likely to lose the thread there. Instead, make the middle a sequence of short blocks where each block can stand alone.

An answer block has:
A clear claim. A constraint. A supporting detail. A direct implication.

If a block cannot survive being quoted by itself, it will not survive compression. This is how you make the middle “hard to summarize badly.”

2. Re-Key The Topic Halfway Through

Drift often happens because the model stops seeing consistent anchors.

At the midpoint, add a short “re-key” that restates the thesis in plain words, restates the key entities, and restates the decision criteria. Two to four sentences are often enough here. Think of this as continuity control for the model.

It also helps compression systems. When you restate what matters, you are telling the compressor what not to throw away.

3. Keep Proof Local To The Claim

Models and compressors both behave better when the supporting detail sits close to the statement it supports.

If your claim is in paragraph 14, and the proof is in paragraph 37, a compressor will often reduce the middle into a summary that drops the link between them. Then the model fills that gap with a best guess.

Local proof looks like:
Claim, then the number, date, definition, or citation right there. If you need a longer explanation, do it after you’ve anchored the claim.

This is also how you become easier to cite. It is hard to cite a claim that requires stitching context from multiple sections.

4. Use Consistent Naming For The Core Objects

This is a quiet one, but it matters a lot. If you rename the same thing five times for style, humans nod, but models can drift.

Pick the term for the core thing and keep it consistent throughout. You can add synonyms for humans, but keep the primary label stable. When systems extract or compress, stable labels become handles. Unstable labels become fog.

5. Treat “Structured Outputs” As A Clue For How Machines Prefer To Consume Information

A big trend in LLM tooling is structured outputs and constrained decoding. The point is not that your article should be JSON. The point is that the ecosystem is moving toward machine-parseable extraction. That trend tells you something important: machines want facts in predictable shapes.

So, inside the middle of your article, include at least a few predictable shapes:
Definitions. Step sequences. Criteria lists. Comparisons with fixed attributes. Named entities tied to specific claims.

Do that, and your content becomes easier to extract, easier to compress safely, and easier to reuse correctly.

How This Shows Up In Real SEO Work

This is the crossover point. If you are an SEO or content lead, you are not optimizing for “a model.” You are optimizing for systems that retrieve, compress, and synthesize.

Your visible symptoms will look like:

• Your article gets paraphrased correctly at the top, but the middle concept is misrepresented. That’s lost-in-the-middle plus compression.
• Your brand gets mentioned, but your supporting evidence does not get carried into the answer. That’s local proof failing. The model cannot justify citing you, so it uses you as background color.
• Your nuanced middle sections become generic. That’s compression, turning your nuance into a bland summary, then the model treating that summary as the “true” middle.
• Your “shorten the middle” move is how you reduce these failure rates. Not by cutting value, but by tightening the information geometry.

A Simple Way To Edit For Middle Survival

Here’s a clean, five-step workflow you can apply to any long piece, and it’s a sequence you can run in an hour or less.

1. Identify the midpoint and read only the middle third. If the middle third can’t be summarized in two sentences without losing meaning, it’s too soft.
2. Add one re-key paragraph at the start of the middle third. Restate: the main claim, the boundaries, and the “so what.” Keep it short.
3. Convert the middle third into four to eight answer blocks. Each block must be quotable. Each block must include its own constraint and at least one supporting detail.
4. Move proof next to claim. If proof is far away, pull a compact proof element up. A number, a definition, a source reference. You can keep the longer explanation later.
5. Stabilize the labels. Pick the name for your key entities and stick to them across the middle.

If you want the nerdy justification for why this works, it is because you are designing for both failure modes documented above: the “lost in the middle” position sensitivity measured in long-context studies, and the reality that production systems compress and fold context to keep agents and workflows stable.

Wrapping Up

Bigger context windows do not save you. They can make your problem worse, because long content invites more compression, and compression invites more loss in the middle.

So yes, keep writing longform when it is warranted, but stop treating the middle like a place to wander. Treat it like the load-bearing span of a bridge. Put the strongest beams there, not the nicest decorations.

That’s how you build content that survives both human reading and machine reuse, without turning your writing into sterile documentation.

More Resources:

This post was originally published on Duane Forrester Decodes.

Featured Image: Collagery/Shutterstock